Sliding Barn Doors For EVERY Style

So many people think that sliding barn doors only work with the rustic look. That they’re something that would come out of say, a barn. But that simply is not the case! As a company that sells doors and sliding barn door hardware, we’ve seen a ton of combinations! We’re here to show you that sliding barn doors come in many shapes and sizes, in every style that’s out there! No matter what your flavor is, you can incorporate this hot trend into your home with ease.


Spectrum of Style with Sliding Barn Doors


This one is what most people expect from sliding barn doors. The rustic look works very well with an unfinished knotted pine door or reclaimed wood put together. We love the rustic look, and the unfinished doors work perfectly because you can stain them however you like to get the look just right for your home. Pair it with black hardware for the best look.

French Country:

To get the french country look with your sliding barn doors, opt for a painted finish. Half glass achieves this look very well, as shown below. French country is about simplicity, fresh, clean colors, and natural materials, like wood. Black hardware would also work best with this style of sliding barn door.
french country sliding barn-door


Contemporary style is all about pushing the boundaries. Mixing materials and media in your decor is what it’s all about. Because of that, you can get a little bit funkier in your door choice! I love this rough, live edge wood slab that they used in the door below. It is definitely a statement piece. You can opt for chrome or black hardware for a contemporary sliding barn door.
Contemporary sliding barn doors


Traditional sliding barn doors can be more simple. A full view french door will work perfectly for a traditional look. You can paint it, stain it, or leave it natural, the choice is up to you! Chrome or black hardware would be appropriate for a traditional sliding barn door.
traditional sliding barn doors


Modern sliding barn doors need to be sleek. The white five panel door below is a perfect choice, complimented by chrome sliding barn door hardware. You can also go with a glass door with no grids. This is a very clean look, with crisp lines and a minimalistic vibe.


Eclectic style is one of my favorites. You can use unique doors, fun patterns or bright colors (or possibly even a combination of the three!) and create a space that is perfectly you. Eclectic style always seems to brighten my day. For eclectic sliding barn doors, I would recommend painting your doors bright colors, or finding something very unexpected to use in place of a door! Black or chrome hardware can be used to pull off the eclectic look with sliding barn doors.
eclectic sliding barn doors

Old World:

This style has to be my favorite. It is so reminiscent of centuries past that it just makes me nostalgic for petticoats and powdered wigs. Maybe Italian sculptors. It probably depends on the door. Look for the oldest door possible, with as much architectural detail as you can find. Clean the dirt off, but don’t worry about the rust or freshening up the paint. That’s where the charm lies! Black hardware is probably the best choice for old world sliding barn doors.
Old world sliding barn doors
What’s your favorite style of sliding barn door? Would you ever put them in your house? Let us know in the comments below!

Builders Surplus is a full service renovation company with locations in Louisville, Kentucky, and Newport, Kentucky, which also serves Cincinnati, Ohio. We are the leading provider of Ledge Stone, wall tile and backsplash tile in Louisville, Newport, and Cincinnati. We specialize in interior design, kitchen design, bathroom remodel, building materials, and home improvement. Interior Design and measurements come as a free service to our clients. We sell building materials ranging in every price point, from unfinished kitchen cabinets to top of the line Wellborn cabinets. In addition to interior design, we also offer installation services. If you have any questions or would like to set up a free design consultation with one of our interior designers, we would encourage you to do so. We love sharing our knowledge with clients & potential home renovators. We write about interior design, home decor, decorating ideas, and home improvement. We hope you’ll check back in for our next article! Happy Renovation!

Written By: Allie Bloyd

How-To Build a Rustic Door Shelf

*If you do not see the youtube video directly below, refresh your browser to view. 

DIY Rustic Door Shelf Tutorial

Hi everybody! Today we are going to do a really awesome how-to. I’m going to teach you how to take an old door and turn it into a leaning door shelf. This is a project that most of you can do on your own, but if you aren’t comfortable with using a circular saw, find someone who is familiar with it that can help you out on that step. The rustic and vintage styles are very popular right now. This is mainly because of the sense of warmth and comfort that these pieces bring to our homes. The feeling of history that comes with a piece like this is absolutely priceless. Up-cycling is another great trend that no only helps to save money, but helps our environment as well. Let’s get started!


The door I used for our door shelf comes out of out of our surplus selection. The great thing about our surplus doors is that you never know what you’re gonna find! We’ve got some really great interior and exterior doors out there and I happened to come across this beauty. It is an old 5 panel, solid wood door with an imperfect finish on it. It is perfect for this project, so I’m excited to share it with you!


Rustic Door Shelf by Builders Surplus


Tools You’ll Need for Your Door Shelf:


Here are the tools that we’re going to need today. We have a circular saw, we’ve got some small screws, 2 picture hanging kits, some decorative chain, a nice decorative door knob that I got from Hobby Lobby, some clamps, a straight edge, and a level. We also need our safety glasses and ear plugs for when we’re using the circular saw. Safety First! You will also need a drill, a hammer and a chisel.


  • 5 Panel Wood Door
  • Circular Saw
  • Safety Glasses & Ear Plugs
  • Clamps
  • Straight Edge
  • Level
  • 2 Picture Hanging Kits (You Can Use Eye Hooks As Well, If So You Will Need 10)
  • Decorative Chain
  • Decorative Door Knob
  • Drill
  • Hammer
  • Chisel
  • Small Screws


Step 1:

Decide Where To Put Your Door Shelf and Take Measurements


First, you are going to take a look at your door and determine where you want it to be in your home and how far you’ll want it to lean. Because you will be using the panels of the door as shelves, you need to realize that the top 2 shelves will need to be cut, or they will hit the wall, making it impossible for them to lay flat. You will need to measure the space from the wall to the door on the top 2 panels (maybe 3 depending on how your shelf is leaning). For me, my top shelf was 3″ from the wall, and my second shelf was 6″ from the wall. The rest of my panels were fine at the size that they were.


Step 2:

Cut 3 Sides of Each Panel in the “Lip” Area With Circular Saw


The next step in our Door Shelf project is to cut out these panels on the back side of the door. Once you have decided which side you would like to be facing out in your home, find a table and flip the door with the back side facing up. This is where you are going to need your circular saw. Again, if you are not familiar with a circular saw, find someone who is to help you out. Make sure you are wearing your eye and ear wear when using the circular saw. We are then going to measure from the blade to the edge of the saw. For me, that is 5 3/4″. I will then place the saw on the spot that I’ll be cutting, and will take a measuring tape and measure 5 3/4″ from my cutting area. I then mark that spot with a straight edge and 2 clamps. This area is called “the fence”. This will ensure that I get a straight cut, as the circular saw will move along “the fence” while I’m making my cuts.


Panel doors such as this will have a “lip” area around the panels. This is to hold the panels in place, as they are not glued or secured in. They simply sit in slots inside on the wooden “lip” surrounding the panel area. Because of this, we will only need to cut out 3 sides of the panel, because once your 3 sides are gone, you will be able to pop and slide the panels out. Be very careful when cutting, but if you happen to go a little too far on your cuts, it is not the end of the world. The beauty of projects like these are that the imperfections make them beautiful. You will cut the bottom lip and the left and right side of each panel “lip” on all 5 door panels.


Step 3:

Chisel Out The “Lips” and Pop Out The Panels

Now that your 3 lip sides are cut, you will need to chisel them out completely  to make sure your panel can come out as easily as possible. Take your chisel and place the flat side up against the door, not the panel area. Take your hammer and get it down to the bottom of the “lip” wood, and then pry any remaining pieces out. After you’ve done the sides, make sure you get in the corners and tap those out as well. Repeat that process for the remaining panels.

Step 4:

Drill Holes for Your Chain & Pre-Drill Screw Holes For Your Door Shelf

*In my project, I had one panel break in half that mysteriously was the perfect size for my top 2 panels (step 1) of my door shelf, 3″ and 6″. Because of this, I did not have to cut any panels to fit the measurements in step 1. I doubt you will have the same luck, so you will need to take your saw and cut one of your panels to fit those measurements, using the same procedures in step 2.
We are now going to drill our holes to secure the shelves. First, you’re going to take a 3/8 bit and drill holes in the top left and right corner of each panel. On the opposite side of your panel, take a 1/8 bit and drill a hole about 1/2 inch from the edge of the panel in the center. Your final holes should be in a triangle shape on your panel.

Step 5:

Connecting your panels to your door

Your door should still be face down on a table, which is how it should remain. Take your first panel with the side with your single 1/8 hole in the center, and place it in on the ledge, straight up, on your door. You should then take a screw and LIGHTLY drill it into the center hole you predrilled to secure it to the door. This screw should NOT be tight. This is because our self is leaning. If you screw it in tightly at a 90 degree angle, your shelves will not be level to the floor. After you have lightly screwed your shelf in place, you will need to get out your decorative chain. Take one end of the chain and thread it through the first hole, going from the top of the shelf to the bottom, then across the bottom and up through the hole on the other side. Take your chain up to the corner of the opened panel area so estimate how much chain you will need for each shelf. You will not know exactly where to secure the chain, because again the door shelf is leaning. Cut your chain based on the amount you assume you will need.
You will then take you mirror hooks (or eye hooks). Drill in your left mirror hook and connect the chain to the loop. You will go ahead and screw in the right mirror hook, but do not connect your chain to it. You will need to adjust these chains when your shelf is straight up. Repeat this step on all remaining panels.

Step 6:

Connecting Your Chain & Finishing Your Shelf

After all of your shelves are lightly secured and have chain threaded & mirror hooks attached, you will carefully stand your shelf up and lean it as it will be in your home. Now that you can see where you need your selves to sit in order to be level, take the side of your chain that you did not connect, and connect it in the appropriate place to your remaining mirror hook. Repeat for the remaining panels.

Step 7:

Adding Decorative Accents

The decorative accent I chose to use for my door shelf was a vintage style door knob. It had 2 holes in it already, so I simply drilled it to the spot where a door knob would be, one screw in the top and one in the bottom. You now have a beautiful, original, rustic or vintage piece that will work wonderfully as a shelf! This is a great conversation piece and the pride that you have in building it will shine through in the finished product. You will want to make sure you test each shelf before placing really heavy items on it, but it is a strong shelf and will work for virtually anything you want to put on it.

How to build a rustic door shelf by builders surplus

My Finished Rustic Door Shelf

That’s all for our how-to on building a rustic, leaning door shelf! I hope you enjoyed it, and please check back soon for other great how-to projects. If you have any how-to video requests, please comment below and we’ll be happy to add them to our list! Have a wonderful day and I wish you luck in building your iwb door shelf!
Builders Surplus is a full service remodeling company with locations in Louisville, Kentucky, and Newport, Kentucky, which also serves Cincinnati, Ohio. We specialize in interior design, which comes as a free service to our clients. We sell building supplies ranging from unused surplus, to first quality in stock, to high end custom order and everything in between. We also provide measurement and full installation services. Our core products consist of kitchen cabinets, bathroom vanities (single vanities and double vanities), interior doors, exterior doors, sinks, faucets, granite countertops, quartz countertops, laminate countertops, windows, and more! If you have any questions or would like to set up a free design consultation with one of our interior designers, we would encourage you to do so. Happy Remodeling!
Written By: Allie Bloyd

Sliding Barn Doors from Knotted Pine Rustic Doors

Sliding barn doors and rustic doors are all the rage right now. And why wouldn’t they be? The rustic or farmhouse style is nostalgic and beautiful in it’s simplicity. It makes you feel warm and cozy inside. I think its something about the smell of fresh cut wood that does it for me. When I first saw sliding barn doors, I knew that I had to have some. I was looking for months for the perfect sliding barn door to put in my house, but some of the prices were way too high for my millennial renovation budget. I have come to be a hardcore DIYer, finding great pieces for a steal and putting in a little sweat equity to make it into exactly what I want.

Easy, Cheap Sliding Rustic Doors

When these gorgeous rustic doors came in at work, I knew I had found the perfect door for my project! This door is the perfect shape, has the beautiful knots that I love so much, and is unfinished, meaning it’s ready to stain or paint it any color that I please!
The next step was to find some inexpensive sliding barn door hardware and learn how to install it. I searched for some time and found so many ways to do it. I could buy $350 hardware, build my own imitation $350 hardware (and by I, I mean my talented husband), install them on galvanized pipes (the look wasn’t exactly what I wanted), or be the spend thrift I choose to be and find the $350 hardware for about $100, shown here. This was the look I was going for, and because the knotted pine door itself is so inexpensive (Around $150, depending on the size), I was able to swing it.
Now that I had found my hardware and had my gorgeous rustic doors, I could decide to paint them or stain them. I am a sucker for a good stain, so the decision was fairly easy for me. Rustic doors are special in that they don’t usually need paint to be pretty, and as someone who likes the distressed look, a darker stain worked well for me.
The stain I used was a mixture of Minwax Dark Walnut and Rustoleum Summer Oak, two of my favorite stains. The dark walnut gives it the deep rich color I was looking for, and the summer oak gives it just the right amount of warmth. I used about 3/4 Walnut, 1/4 Summer oak. For every 2 cups of stain, I add 1 cup of paint thinner. This allows the stain to be more build able and helps you achieve the perfect color you’re looking for.
Lastly, I had to install the hardware. I followed this tutorial and it worked out perfectly!

Hardware for Sliding Barn Doors is pretty easy to install.

Before the instructions, there are just a few things to keep in mind before beginning.
1. The door itself should be 1-2″ wider on the side of each opening.
2. Making sure the track is level is extremely important.
3. Are the holes pre-drilled? If not, you need to make sure to locate the studs and drill through the track.

To start, the track should be twice the width of the door. If your door is 36″, than the track should be 72″,
1. The track will be hung above the door opening, depending on the sliding barn door hardware style and the individual opening, the distance will vary. We recommend 1/4-1/2″ of a gap between the top of the door and the bottom of the track.
2. If the holes are not pre-drilled, locate the position of the studs and mark them on the track. If the track was ordered pre-drilled, you can skip the next step.
3. With a 3/8″ drill bit, drill into the track at the marked locations, making sure to include holes on both ends of the track for the stops.
4. With the holes drilled, hold the track up at the determined height, and place the 1 1/2″ spacer between the track and the wall. A lag bolt will then enter the track, go through the spacer, and enter into the wall. Note: it may be helpful to leave some slack in tightening until all bolts are into the wall. Once all are loosely hung, you may go back and tighten them all the way.
*NOTE: The spacers keep the track of the wall at an even length
1. The stops are to be placed on each ends of the track. However, they can be placed anywhere along the track if you are trying to stop the door at a different location than the tracks end.
2. Included in your hardware set are 1 3/4″ tap bolts, use those to attach the stop to the track. (You may also use a lag and spacer if the hole location lines up with a stud or you are going into backing.)
The standard set of hardware works with doors of 1 1/4″-2 1/4″ thickness.
1. Stand the door up under the track to find  the best location for the straps. The top mount styles won’t require markings on the door, but any style that has straps will require markings. Mark off where the holes in the straps will go.
2. Drill through the door at the markings, a 3/8″ pilot bit works well.
3. Attach the straps before placing the hardware on the rail. Once the straps are securely tightened you are ready to place the hardware on the rail

I am so in love with my new sliding barn doors made out of these gorgeous knotted pine rustic doors. They were so easy to work with, I would recommend them to anyone and everyone. These interior doors can be used in modern space, rustic spaces, and in traditional spaces. We also offer them in 8, 10 or 15 lite french doors, which are gorgeous as well. They are extremely versatile and will morph to fit the needs of your home.
For more information on our knotted pine rustic doors, or about building sliding barn doors, feel free to reach out to us! Please like, share or tweet this article, and subscribe to our newsletter to receive more awesome remodeling tips, tricks & special discounts!
Happy Remodeling!